Custom Fan Decks & Shade Cards
We make custom fan decks, sample cases and shade cards for your material or colour range.
We made the examples shown for past customers. They are for reference, not stock items or fixed designs. Your samples and intended use guide the structure, size and layout. Covers, wording and printing follow your requirements. Send your own design or reference images, or contact us without a design.
Prefer email? Write to [email protected]

Your Samples and Who Fits Them
Your Material Samples
You supply the actual material or coated pieces. Suitable thin samples can become the leaves themselves; smaller pieces can be fitted to carriers (the leaves that hold your samples). Thin or delicate material may need extra support, especially around a punched hole. We make the presentation parts, not your paint, coating or material samples.
Printed Colour References
We print approved artwork on the agreed paper or other material and finish. Printed colours are not automatically paint or coating standards. Texture, gloss, lighting and viewing angle can affect their appearance, so we agree the reference and approval method for your project. Cover artwork and sample colour are approved separately.
Normally, we supply leaves, covers and fittings, and you add your samples locally. Factory cutting, mounting, assembly and packing are quoted separately.
Photos and dimensions can start the discussion. We may ask for representative pieces to check the fit; agree the shipment with us before sending them. You pay the inbound sample freight. For factory assembly, we also agree quantities and how to handle any remaining material according to your instructions.
Full-page Fan Decks

Show one material, colour or finish on each leaf. Suitable thin samples can form the leaves; smaller swatches can be mounted on printed carrier leaves. The wood-grain example keeps the samples, printed cover and information card together. Cover size and the connection are agreed for your samples, with space to hold and compare them.
Screw-post Sample Cases

Suitable thin material swatches rotate on a removable screw post and fold back inside the case. We check the sample dimensions, edge strength and turning space before agreeing the case size, post length and hole position. This removable fastener is also called a Chicago screw or binding screw.
- Post outside diameter
- 5 mm
- Recommended sample hole
- 6 mm, subject to an actual fit check
These measurements apply only to the case shown; they are not standard dimensions for every fan deck.
Slotted Card Sample Books

Display gift, membership, loyalty, hotel key and payment card designs in slots on printed carrier leaves. The metal pivot passes through these leaves, not the cards, so the cards need no pivot hole. We agree the slots, leaf size and cover around your card dimensions and layout. Names, codes or product details can be printed beside the cards.
Covers and Printed Information
Choose separate front and back covers or a connected cover that wraps around the samples. The thicknesses below apply only to these examples. We confirm the size, printing, corners and holes for your collection.

1.2 mm Frosted PVC
Separate printed front and back sheets with a frosted surface. The bending view shows the flexibility of this cover; the flat view shows the rounded corners and punched holes.
Frosted PVC cover sheets, shown flat and bent.

1.2 mm Gloss PVC
The front, spine and back form one printed cover. We size the spine for the complete loaded collection and agree the artwork and hole positions before production.
Gloss PVC wraparound cover with a connecting spine.

3 mm Acrylic
Rigid printed front and back sheets. The side view shows the edge thickness; dimensions, corner holes and edge finishing are confirmed for the samples.
Printed acrylic cover sheets with a side view.
Print your logo, range name, sample codes and approved product information on the covers or carrier leaves. Dividers, QR codes, barcodes and edition dates can be included. We check that the information remains readable in the intended viewing position. Keep essential sample names and codes visible alongside any QR code.
Magnetic Cover Closure

The leaves turn around a metal fastener and fold back inside the protective cover. Magnets hold the cover shut; the metal fastener connects the leaves. We check the opening direction, turning space and cover fit with the planned collection.
Size, Loaded Thickness and Binding
- Finished size
- We use the sample length, width, count and layout, with space to hold and compare them. Empty leaf dimensions or colour count alone do not determine the finished size.
- Complete loaded thickness
- Include the combined sample thickness if known. Mounted or slotted layouts must also allow for carrier leaves, fitted samples or inserted cards, covers and fittings. We check the complete loaded stack, not just the bare samples.
- Binding
- A rivet joins the leaves permanently. A removable screw post can support planned replacements or added colours. Tell us about updates early so we can agree spare capacity, post length, leaf order and replacement parts. Other pivots are reviewed for your project.
- Punched holes
- We check hole position, material strength, post diameter and room for turning. A grommet is a ring that reinforces the hole; it does not connect the leaves.
- Physical fit
- Before production, we check that the samples turn, the cover closes and the samples are in the right order. We also check readable codes, a complete set and suitable packing. Delicate or unusual materials need checks for sample direction, edge strength, bonding, added thickness and load on the pivot.
Order and Production Details
- Minimum order
- Many standard constructions start from 5 pieces or sets, subject to sample review.
- Physical prototype
- A single piece is treated as a physical prototype and quoted separately. Standard prototypes typically take about 10 working days; complex prototypes about 15 working days.
- Production
- Typically 10–20 working days.
- Timing
- Each stage starts after the required approvals, with the starting point confirmed in the quotation. Shipping time is separate.
Very high leaf counts, thick samples, special fittings or complex colour approval can change the minimum order and schedule.
Tell Us About Your Fan Deck
Start with photos and the details you already know; estimates are welcome. Send your own design or reference images, or contact us without a design or chosen structure.
The examples shown are past custom projects made by ZIVFY, not stock items or fixed designs. We agree the structure, size and sample layout for your samples and use. The cover, wording and printing follow your requirements.
- Material names, photos and how the deck will be used.
- Sample length and width, plus thickness if known.
- Samples per deck and the number of decks required.
- Branding, sample codes and available artwork.
- Local assembly or the factory work you need.
- Destination, packing needs and target date.
Mention any existing holes or planned colour additions. We reply to every inquiry within 12 hours.
Tell Us Your Fan Deck Idea
Describe what you have in mind in your own words. You don't need specs or a finished design. We will work out the structure with you.
Design Is Included in Your Order
- Discuss your samples
- Confirm the format and quote
- Make payment
- Receive your free design
We prepare the design for your agreed sample presentation, using your logo, text and sample information.
Fan Deck Questions
Can leaves be replaced or new colours added later?
A removable screw post can support planned updates. Spare capacity, post length, leaf sequence and replacement parts need to be agreed in advance. Edition labels can identify updated collections. A permanent rivet is not intended for routine changes.
Do we need to send physical samples?
Photos, dimensions and local fitting can be enough to begin. Representative pieces may be requested for a fit check. Send samples for review or factory assembly only after the shipment is agreed. The buyer pays inbound sample freight.
Can you use delicate or unusual materials?
We review the actual material before confirming the construction. A carrier or reinforced hole may be needed. Sample direction, edge strength, bonding, added thickness, pivot load and packing are checked with representative samples.
What is the difference between a fan deck and a shade card?
A fan deck has leaves joined at a pivot so they swing out for comparison. A shade card is a colour or finish reference. It can be flat, folded or pivoted; the name alone does not define its binding.
What affects the price?
Size, leaf count, materials, printing, hardware, sample preparation, assembly and packing affect the quotation. Small runs have a higher unit cost because setup and production work are spread across fewer sets.
What happens to material left over after factory assembly?
Before you send samples, we agree quantities and whether remaining material will be returned, retained or disposed of. We handle it according to your instructions. Shipping preparation and material ownership are confirmed as part of that agreement.
Do you print colour shade cards as well as fan decks?
Yes. Besides paint fan decks, we handle shade card printing for paint, coating and powder coating brands: single colour shade cards, folded cards and multi-page books. You send your colour codes, and we confirm the printed colours with you before the full run.
Do you sell ready-made RAL or brand colour cards?
No. Unlike shade card manufacturers that sell standard colour charts, we only make custom decks and cards for your own colours. If you are comparing shade card printers for your own range, send us your colour list, card size and quantity. Why printed colour cards can’t stand in for your real finishes is explained in our custom fan deck guide.
