Custom Sample Boards

Custom printed boards for your material samples, with the structure, size and sample layout agreed around your samples and intended use.

The photos show custom projects made by ZIVFY for past clients, not stock items or fixed designs. Any included cover, text and printing follow your requirements. Send your design or reference images, or contact us without a design or chosen style.

You supply the material samples. We normally supply empty boards for local mounting; factory mounting is quoted separately.

Custom project example
Open white presentation box with wood-finish and decorative sample boards and a separate lid.
Sample boards in a presentation box.

Handheld sample boards

Reference structure
Colour swatch board with rows of mounted finish samples and a leather carrying handle.
A handled board keeps selected finishes visible together.

Handheld boards keep selected finishes together for sales visits and close comparison. The handle, grip space, stiffness and balance are planned for the complete sample load.

Leave room for labels and touching the intended surfaces.

Counter displays and board sets

Reference structure
Two blue display trays showing a hand lifting one wood sample board and a full upright board set.
A single board lifts out of a coordinated counter display.

A set of boards can sit in an agreed tray or support for counter display. Coordinate board sizes, sample order, product codes and viewing direction so the range is easy to compare.

In the pictured example, a whole board lifts out of the tray. This does not mean its individual samples are removable. Trays, stands and cases are specified separately and included only when listed in the quotation.

Materials & Applications

Fixed or removable samples

Reference structure
Open white case with wood-finish samples in individual black recesses with finger-access notches.
Recesses with finger access, shown inside a presentation case.

Choose the fixing method around the sample surface, weight, edges and how often it will be handled or replaced.

Surface mounting
Samples can be fixed with their display faces visible when the material and fixing method are compatible. Position them so holders do not hide the intended touch areas or labels.
Recesses, slots and frames
These locate samples and help control edge contact. Spacers can separate sensitive pieces where needed. Fit and spacing are checked with the actual samples.
Removable holders
Pockets, tabs, clips or magnetic carriers may allow individual samples to be removed when the sample and handling checks support that design. Magnetic carriers need checks of sample weight, holding force and repeated handling.

Agree whether updates involve one sample, its holder or the whole board. Frequent reordering may suit a folder or binder better.

The pictured presentation case is included only when listed in the quotation.

Materials & Applications

Board construction and printed information

Reference structure
Open ring binder with printed presentation pages, a mounted woodgrain sample and detached board carriers.
Board carriers and printed information shown within a binder.
Body and reinforcement
We specify wrapped rigid board or selected rigid, foam or reinforced cores, with thickness chosen for the sample load. Thickness alone does not establish load capacity; flatness, stiffness and handling must be checked with the fitted samples.
Handles and edges
Handle position, grip space, shape, rear reinforcement and edge protection are planned around the complete board weight and carrying balance.
Printing
Front and back printing or labels can carry product codes, specifications, photography and QR links. Match each sample to its information and keep labels clear of holders and touch areas.
Finish
Lamination, foil, embossing, debossing or spot UV depend on compatible stock and artwork.
Paper options
We review the paper used for the board or cover separately from the material samples you supply.

The pictured binder and other accessories are included only when specified in the quotation.

Check the board with its samples fitted

Reference structure
Black and white sample boards with handles and mounted material samples beside protective packing materials.
Handled board examples and protective packing.

Your team can fit representative samples to the physical prototype locally. Factory checks can be arranged separately. A drawing or empty prototype cannot replace this fitted check.

Before production approval, check:

  • Flatness, stiffness, handle position and carrying balance.
  • Retention, spacing, edges, readable labels and agreed touch or removal access.
  • Fit with agreed supports or cases, set completeness and protective packing.

Check heavy, sharp or fragile samples with care. The approved specification becomes the production reference.

Sample fitting and supply

You fit the samples

We normally supply empty boards for local mounting. Your quotation can specify printed boards, labels, position marks, recesses, pockets, templates, mounting components and protective packaging; these are not all standard inclusions.

Factory mounting

Labelling, mounting, assembly and packing with your prepared samples are quoted separately. Confirm any cutting or other preparation before sending materials.

Coordinated material collections

Reference structure
Open material sample book with mounted wood-finish panels beside a matching stack with teal covers.
Matching covers and mounted panels form a coordinated material collection.

Matching covers and mounted panels form a coordinated collection. Agree the panel layout, cover dimensions and range identification. Covers and storage components are included only as listed in the quotation.

Making boards for tile, stone or flooring? Our guide to tile sample boards shows when a fold-out works better than a box or a binder.

Working with carpet? Our guide to carpet sample boards covers tape, hot glue and slotted pages.

Working with thick, heavy samples such as brick or roof shingles? See our guide to brick sample boards.

Materials & Applications

Minimum order and timing

Minimum order
Many standard structures start from 5 pieces, subject to sample review. Small runs cost more per unit. Heavy, sharp, fragile or unusually complex loads may need a different minimum or schedule.
Physical prototype
One prototype is quoted separately. Standard prototypes typically take about 10 working days; complex prototypes about 15.
Production
Production typically takes 10–20 working days.
When timing starts
Each stage starts after its required approvals; the quotation confirms the start point and schedule. Shipping time is additional.

Request a sample-board quote

The photos show custom projects made by ZIVFY for past clients, for style reference. They are not stock products or fixed standard designs. Your structure, size and sample layout are agreed around your samples and use, with customised text, printing and any included cover.

Share your own design or reference images, or contact us without a finished design or chosen style. Estimates and reference photos are welcome.

Tell us about your project

  • Material, surface and edges, with sample photos or references.
  • Each sample’s length, width, thickness and approximate weight.
  • Sample count, sequence and required number of boards.
  • Fixed or removable samples, and handheld, counter or coordinated display use.
  • Artwork, labels, product codes and surfaces customers need to touch.
  • Destination, required date and local fitting or separately quoted factory mounting.

You supply the material samples. We normally supply empty boards for local mounting. Factory labelling, mounting, assembly and packing using your prepared samples are quoted separately. Cutting or other preparation needs separate confirmation before you send materials. Pictured accessories are included only as listed in your quotation.

We reply to every inquiry within 12 hours.

Tell Us Your Sample Board Idea

Describe what you have in mind in your own words. You don't need specs or a finished design. We will work out the structure with you.

The more you tell us, the more useful our first reply will be.

JPG, PNG, PDF, AI or ZIP. No files ready? You can send them later.

Many formats start at 5 books.

Submitting this form does not place an order or charge you. We reply to every inquiry within 12 hours.

Chat on WhatsApp

Design Is Included in Your Order

  1. Discuss your samples
  2. Confirm the format and quote
  3. Make payment
  4. Receive your free design

After payment, we prepare the design within the agreed scope using your logo, text and sample information. The physical prototype is quoted separately.

Sample board questions

What is the difference between a sample board and a sample folder?

A board keeps materials visible together on one surface. A folder opens and can hold panels, pockets or pages. A binder is useful when pages need to be reordered or updated.

Can a board hold heavy or fragile samples?

It can be developed for reviewed samples, but the board, fixing method, edge protection, total handling weight and packing must be checked with the real material. Some sets need the enclosed protection of a presentation box. We confirm suitability for each project.

Can individual samples be removed or replaced?

Yes, when this is designed into the holders. Magnetic carriers require suitable samples and checks of weight, holding force and repeated handling. Frequent reordering may suit a folder or binder better.

Can you cut, label and mount our samples?

Factory labeling, mounting and assembly are quoted separately. Cutting or other preparation of your samples needs separate confirmation. We make the boards and presentation components; we do not manufacture or supply your material samples.

Do we need to send our full sample range?

Usually, no. Start with photos and measurements. Send physical samples only after the service, quantities, customs and inbound freight arrangements are agreed. The buyer pays the agreed inbound freight. Any return, retention or disposal of remaining samples is agreed before shipment and follows your instructions.

Do you make product sample display boards for showrooms?

We make product sample display boards in card and greyboard: flat boards and fold-outs that a sales rep can carry or post. We do not make large MDF boards for wall racks. As a sample board manufacturer for tile, stone and flooring brands, we also wrote a guide to tile sample boards.

Related formats