Thin metal transfer decal full resolution ✕
Thin Metal Transfer Decals

Custom Metal Stickers Made from Real Nickel

Our custom metal stickers are made from electroformed nickel. They are also called metal logo stickers, metal decals or metal transfer decals. A transparent carrier film holds the thin metal logo for positioning; after application, peel away the film so only the metal logo remains on the surface. Each logo is real nickel, about 0.08–0.2 mm (0.003–0.008 in) thick including the 3M adhesive. The minimum order is 10 pieces, so you can test them on your own product before a larger run. They hold best on smooth, flat surfaces such as packaging, appliances and stationery.

Thin metal logo Surface-mounted metallic logo effect without bulky plate edges.
No sticker background After transfer, the visible result is the metallic design itself.
Clear carrier film Supplied on film sheets for alignment, shipping, and application.
Packaging & products For product and packaging branding.
Carrier film removal: the clear film lifts away from the metal lettering on the surface.
Thin surface profile Designed to sit close to the substrate, not like a raised nameplate.
Carrier sheet supply Logos can be supplied on clear sheets for storage and batch application.
Product Definition full resolution ✕
Clear carrier film being peeled back from gold Casarte lettering on a black card
Applied logo, film removal: the carrier film peels away while the metal lettering stays on the black card. These images show different logo examples, not a complete application tutorial.
Product Definition

What are custom metal stickers?

Metal transfer decals are thin metallic logos made with a nickel-based electroformed structure, plating, and color layers. They are supplied on clear carrier film for transfer to products, packaging, cards, and panels.

01
Carrier holds the logo The transparent carrier film holds the thin metal logo in position.
02
Apply to the surface Position the logo on the product surface using the carrier film.
03
Peel away the film Remove the carrier film after application; only the metal logo remains.
Metal logo lettering applied to a white container.Watch application video29 seconds
Applying a metal logo sticker: press it down, rub over the film, then peel the film away.
Metal Transfer vs Adhesive Label full resolution ✕
Metal Transfer vs Adhesive Label

A metallic label shows its film. A metal sticker leaves only the logo.

The key difference is the visible edge. A normal metallic adhesive label still has a film or sticker area around the design. A thin metal transfer decal is carried by a clear film during application, then leaves the metallic logo directly on the surface.

Metallic adhesive label

Visible label film or adhesive edge

Metallic PET labels and printed adhesive labels are useful when the design needs a full label area. However, the film edge or label boundary can still be visible around the artwork.

Adhesive label example: the metallic film still functions as a label layer, so the surrounding film or edge may remain visible depending on the application.
Thin metal transfer decal

Thin metal logo with no printed background

After transfer, the clear carrier film is removed and only the thin metallic logo remains visible. This creates a cleaner premium branding effect for packaging, cards, bottles, rigid panels, equipment, and product surfaces.

Metal transfer example: the final result is a thin metallic logo sitting close to the surface, not a thick nameplate or a full adhesive label.
Supply Format full resolution ✕
Supply Format

Supplied on clear carrier sheets, not as roll labels.

Metal transfer decals are usually supplied on full clear carrier sheets, with a standard master sheet size of approximately 200 × 295 mm. Sheet handling protects and organizes thin logos for shipping, storage, separation, and batch application.

01
Full carrier sheet supply Multiple metallic logos can be arranged on one carrier sheet. The sheet layout helps control quantity, spacing, storage, and batch application.
02
Carrier film supports application The clear carrier film helps hold each thin metal logo in position before transfer. Individual sections can be separated when needed for placement.
03
Special packing needs review Individual cut pieces, single-unit handling, special packing, retail-ready sets, or unusual handling need review before quotation because they affect labor, sheet layout, and packing.
Full carrier sheet format: metal transfer decals can be supplied as repeated logos on a full transfer sheet for shipping, storage, and batch application.
Not roll labels Metal transfer decals are supplied on carrier sheets, not as ordinary roll label production.
Sheet layout affects price Logo size, spacing, metal color, quantity, and sheet arrangement affect quotation.
Handling affects price Cutting, individual packing, and other handling requirements are reviewed with the sheet layout.
Color & Finish Options full resolution ✕
Color & Finish Options

Metallic colors and finish effects for thin transfer logos.

Metal transfer decals can be produced in multiple metallic colors and surface effects. These options should be reviewed as real metallic finishes, not ordinary printed ink colors, because reflection, coating, and surface contrast affect the final look.

Color sample review: metal transfer decal colors should be checked as real metallic finishes, not ordinary printed ink colors. Final color may vary slightly by plating, coating, batch, and surface reflection.
Color note for production review Common options include bright gold, bright silver, black, red, blue, green, and rose gold. Custom color-coated effects can be reviewed. Except for bright silver, plated or color-coated finishes may have slight batch variation, especially rose gold and custom tones. Confirm a sample or proof if color accuracy is important.
Gold Warm metallic logo finish for premium packaging and product branding.
Silver Clean cool metallic reference with strong highlight visibility.
Black Dark metallic branding direction for subtle contrast.
Red Color-coated metal effect for strong brand accents.
Blue Cool-toned color-coated metal option.
Green Special color-coated metal option for selected brand palettes.
Rose Gold Warm plated tone that should be reviewed by sample when color is critical.
Copper
Custom Color Review Reviewed by logo detail, quantity, surface, and finish target.
Texture Bright, brushed, matte, or textured effects Finish texture can be reviewed depending on logo structure, detail size, metal color, and production feasibility.
Detail Thin raised detail and contrast effects Some logo designs can be reviewed for stronger metallic contrast, but the decal should still remain thin and surface-mounted.
Combination Two-tone or color-combination review Multi-color metal transfer effects are possible in selected cases, but artwork complexity, tolerance, and registration must be checked first.
Adhesive & Surface Review full resolution ✕
Adhesive & Surface Review

Review the surface before choosing the adhesive and application method.

Review the actual product surface, logo detail, adhesive, carrier film, cleaning, pressure, curing conditions, and application method before production.

Standard adhesive review

Smooth surface

For smooth, clean, rigid surfaces, a standard adhesive structure can usually be reviewed first. The final result still depends on actual surface coating, pressure, and curing conditions.

Stronger adhesive review

Texture review

For lightly textured, coated, or metal surfaces, a stronger adhesive direction may need to be reviewed. Open areas, hollow logo details, and fine strokes can increase glue overflow or edge-lift risk.

Surface testing is recommended before bulk production. Highly curved or spherical areas, soft or flexible materials, soft packaging, oily or dusty surfaces, heavy texture, powder coating, and fabric are not recommended by default. Slight curves may be reviewed case by case; selected eyewear areas need enough logo area and a limited curve. Testing is recommended before production.
Film and backing: the clear film is partly lifted over silver lettering on its backing sheet.
Best Fit Clean, smooth, rigid surfaces Selected sunglasses frames, electronics shells and panels, appliances, rigid packaging, acrylic, glass bottles, coated boxes, equipment panels, and clean rigid products can be reviewed.
Review Light texture or coated surfaces Painted or coated packaging, acrylic, PVC, plastic, glass, metal, and lightly textured surfaces need review of coating, adhesion, carrier release, and sample performance.
Testing Test the actual surface Surface varnish, acrylic grade, plastic surface, glass coating, ink layer, adhesive condition, application pressure, and the final application process can affect adhesion or transfer.
Carrier Film Options full resolution ✕
Carrier film removal: the rose gold logo stays on the round surface as the clear film lifts away.
Carrier Film Options

Carrier film should match the surface and application method.

Carrier film choice affects positioning, peel release, residue risk, surface damage risk, and application cleanliness.

Standard carrier film

Default review

Standard carrier film can be used for many durable hard surfaces, but it may be more difficult to peel on some smooth PVC, acrylic, coated surfaces, or delicate paper packaging.

Clean-release carrier film review

Surface-sensitive

A cleaner-release carrier film can be reviewed for luxury boxes, paper packaging, acrylic, PVC, glass, and smooth product surfaces to reduce residue, tearing, coating lift, or difficult peeling risk.

No carrier film option should be treated as a universal guarantee. Review the chosen film with your product sample before bulk production. See the adhesive and surface guidance.
Paper Box Reduce paper tearing or coating lift risk Luxury paper packaging may need clean-release carrier film review before production.
Acrylic / PVC Reduce residue and difficult peeling Smooth plastic, acrylic, glass, or coated surfaces may require a different carrier film approach.
Hard Product Standard film may be suitable Durable rigid surfaces can often be reviewed with the standard carrier film first.
Application Examples full resolution ✕
Best Applications

Where thin metal transfer decals are used.

Metal stickers are most commonly used on smooth, flat, rigid surfaces: packaging, appliances, electronics and stationery. Curved items such as glass bottles, candle jars and eyewear also work for small logos. Order the 10-piece minimum and test on your product first.

Packaging

Gift boxes and rigid packaging

Gift boxes, wine boxes, kraft and coated paper boxes. On delicate paper, we review a clean-release carrier film.

Cosmetics

Cosmetic and perfume packaging

Perfume boxes, compact cases, caps and the flat face of cosmetic containers.

Electronics

Appliances and electronics

Small appliances, speakers, laptops, electronics shells and control panels on indoor equipment.

Products

Stationery, gifts and promotional items

Notebook covers, gift items, and selected ceramic, plastic or coated items for display or light use. Not for mugs that are washed often or go in the dishwasher.

Bottles

Glass bottles and jars (curved)

Glass bottles, candle jars and rigid containers. On a curve, keep the logo about 3–5 cm long and test 10 pieces first.

Eyewear

Sunglasses and eyewear (curved)

Small brand logos on temples, frames and cases. Test on your frame before a full order.

Application examples: common branding uses for metal transfer decals. See the adhesive and surface guidance for compatibility review.
Sample & Surface Review

Review metal transfer decal samples before final production.

Metal transfer decals depend on logo detail, metal color, adhesive, carrier film, and product surface. Sample references and surface review help confirm whether the selected thin metallic logo direction is suitable before bulk production.

Metal finish references Review gold, silver, copper, black, rose gold, or other available metallic finish directions.
Adhesive and carrier film check Surface type, carrier film, and application method should be reviewed together.
Artwork detail review Small isolated details, bridge lines, hollow areas, sharp points, and very fine strokes need production review.
Project-matched sample support Samples should be matched to the customer’s product direction, surface, and finish target, not treated as unrelated material sets.

We don’t keep ready-made samples for every size, color and surface. The simplest test is our minimum order of 10 pieces: apply them to your own product, handle it the way you normally would, then decide.

Logo on carrier film: the transparent film holds the separate logo elements together before application.
Custom Quote Request

Request a Custom Metal Logo Stickers Quote

Just tell us your idea in your own words. You don’t need to know the technical details. We’ll work out the adhesive, film and finish for you.

Working with ZIVFY

Kevin, founder · 18 years in printing · Our factory is in Jiangsu, China

  • Digital proof first. Nothing goes into production until you approve it.
  • Every order is checked before it ships.
  • We reply to every inquiry within 12 hours.
  • Pay by PayPal, including credit and debit cards through PayPal.
  • Your artwork files stay confidential.
PDF, PNG or JPG references can be uploaded here. If your vector file format is rejected, export a PDF copy. 200MB total limit.
No files selected.
Send each logo file and photos of the application surface. Vector artwork is preferred; JPG/PNG references may need vector files for production.
Artwork Support note: If you do not have final production-ready artwork, you can still send your logo, text, rough layout, product photos, or reference images. Basic layout support can be reviewed after order specification and payment are confirmed. Complex design, logo creation, major creative work, or cancellation after design work starts may require a separate artwork fee.
Can I request a quote for a small quantity or multiple logo designs?

Yes. The minimum order is 10 pieces, so you can order 10, apply them to your own product and use it for a while before a larger run. For several designs, send the artwork file, finished size, quantity and preferred color or finish for each one.

How thick are your metal stickers?

About 0.08–0.2 mm (0.003–0.008 in), including the adhesive. Thin enough to look like part of the product, with a crisp, slightly raised metal edge you can feel.

Can metal stickers go on curved surfaces?

Yes, for small logos about 3–5 cm long on gently curved items such as glass bottles, candle jars and eyewear frames. Flat surfaces are more reliable. A large logo on a tight curve can lift at the edges, so order the 10-piece minimum and test on your product first.

What artwork file do you need?

Vector artwork is preferred. AI, CDR, PDF, EPS, or SVG files are best for production review. JPG or PNG files can be used as references, but low-resolution images are usually not enough for accurate metal logo production.

Why do small details need bridge lines?

Single isolated blocks or strokes smaller than approximately 4 × 4 mm may need metal bridge lines to prevent missing parts, shifting, weak attachment, or application issues. Very thin long lines and sharp points should also be reviewed.

Are they supplied on rolls?

They are supplied on carrier sheets. See sheet size, layout, and packing options.

What is the difference between 3M-7533 and 3M-467?

3M-7533 is usually reviewed for regular flat, smooth, rigid surfaces, with an adhesive thickness around 10–20 microns. 3M-467 is thicker, around 50 microns, and may be reviewed for sheet metal or lightly textured surfaces, but open or hollow artwork areas may have glue overflow risk.

Why would I need clean transfer film?

Clean transfer film can be reviewed to reduce residue, paper tearing, coating lift, or difficult peeling. See carrier film options.

Need help checking your logo or product surface?

Send your logo file, finished size, quantity, color preference, and surface photos for review.

Request a Quote