Many buyers ask about the mold fee in their first email. Our answer is always the same: there isn’t one, because there’s no mold.
Electroformed metal stickers aren’t stamped from a steel die. They’re grown: nickel builds up on a stainless steel plate in the exact shape of your logo. With no mold to make, the setup for 10 stickers is about the same as for 1,000, which is why we can start at 10 pieces.
What is an electroformed metal sticker?
It’s a thin layer of real nickel, about 0.08–0.2 mm (0.003–0.008 in) thick including the adhesive. Each letter and shape is a separate piece of metal with no background between them, so once it’s applied, the logo looks like part of the product.
The stickers arrive on a clear transfer film. You peel off the backing, place the sticker on your product and press it down, then peel the transfer film away. Only the metal logo stays.
How are metal stickers made, step by step?
- Polish a stainless steel plate. The smoother the plate, the brighter the finished metal. The nickel copies the surface of the plate, so a brushed plate gives you a brushed sticker and a matte plate gives you a matte one.
- Coat the plate and expose it through a film. The plate gets a light-sensitive coating. The film is a clear sheet printed with your logo, a bit like a stencil. Light passes through it and transfers the shape of the logo onto the plate.
- Develop the plate. The unexposed coating is washed away, leaving open areas in the shape of your logo.
- Electroform the nickel. The plate goes into a plating bath, and nickel builds up layer by layer in those open areas until it’s thick enough. This is the step that gives the sticker its shape.
- Add the color. Gold and silver are the most common, in bright or matte, along with painted colors such as red, black and teal.
- Add the adhesive and transfer film. The stickers come off the plate, and every batch is checked before it ships.
The shape comes from the film, not from a mold. Fine lines and small details work as long as the film can capture them, but very thin strokes and very small letters are more likely to shift once they’re applied.
Electroforming vs. electroplating: what’s the difference?
Electroplating gives an existing object a thin metal coat, like the chrome on a faucet. The object stays; the metal is only the surface.
Electroforming keeps building the metal until it’s thick enough to stand on its own, then separates it from the base, so the metal layer itself becomes the product (Veco explains the difference in more detail). That’s how a metal sticker is made: the nickel lifted off the plate is the logo you apply.
This is also what separates them from metallic stickers, which are plastic film printed with metallic ink or laminated with a metallized layer. Those are soft and flexible. Electroformed stickers are real metal with firm, crisp edges. For a side-by-side comparison, see metal stickers vs dome stickers.
Why is there no mold fee?
Because there’s no steel mold. Stamped and die-cast metal badges need a mold first, and that one-time cost gets spread across the order, so small runs end up expensive per piece. Electroforming only needs a film, and preparing it takes about the same work for 10 stickers as for 1,000. That’s why we don’t charge a setup fee.
Reorders work the same way. There’s nothing to keep on file, and your next order isn’t affected.
Most of our customers start with 10 pieces. They want to try them on their own product first: how easy they are to apply, how well they hold, and how they look with the packaging. We’re happy to let them test before they order more.
Small quantities are hard to find elsewhere. On a guitar builders’ forum, one builder wanted about 10 nickel headstock logos, but every supplier he found required 1,000 (read the thread).
What can go wrong in production?
The three most common defects are:
- Burrs: rough edges or small raised bits along the outline.
- Pits: tiny dents in the surface.
- Pinholes: very small holes in the surface.
These usually come from the plating bath, and adjusting the bath fixes them. Any sticker with a defect is pulled before shipping.
One issue comes from the design itself: small, separate letters can shift. A thin line of serif text under a logo, for example, can move out of place with a light rub. When we see a design like this, we tell you before you order and suggest thickening the letters or joining them with a baseline so they form one piece. If you’d rather keep the design as it is, you can order 10 and test them first.
How durable is the color?
Gold and silver are the most durable options, and the ones customers choose most. The gold is an electroplated metal layer, not paint, so it doesn’t wear off easily.
Painted colors such as red, matte black and teal are a coat of paint on the surface. On edges that get rubbed often, they can wear over time. For products that are handled a lot or carried in a pocket, gold or silver is the better choice.
Mirror gold can look dark against a dark background, and in photos it can even look black. That’s reflection, not a color error.
We haven’t tested them on cups that are scrubbed often or go in the dishwasher, so we can’t promise how they’ll hold up there.
Where to start
Tell us three things: the size of your logo, the color you want, and what you’re applying it to. We’ll check whether the design works and send you a digital proof. If you’d like to test first, start with 10 metal stickers.
If they’re going on a bottle or jar, read our guide to metal logo stickers on curved surfaces first.
