By Kevin · ZIVFY · 18 years of professional printing experience

Yes, they can go on. Flat surfaces are the easiest, and on curved items like candle jars and drinking glasses, a logo around 3–5 cm long usually sits fine. The real trouble is rarely the curve. It’s the small, separate letters inside the logo.

One thing first: metal stickers hold best on flat, smooth surfaces such as boxes, appliances and stationery. Curves can work, but they carry more risk, so keep the logo small and test before a full order. For flat uses, see our metal stickers page.

Lately, the people asking us about metal logo stickers want to put them on surprisingly similar things: glass candle jars, eyeglass frames and drinking glasses. None of them are flat, and almost everyone wants the logo small and delicate. Here’s what we’ve seen on these projects.

How are metal logo stickers different from metallic stickers?

First, what we mean. Many “metallic stickers” are really metallic-colored film, such as metallic PET or foil stickers. They look like metal, but underneath they are still plastic and feel soft to the touch.

Our metal logo stickers are electroformed nickel. Electroforming builds metal up on a mold until it reaches the right thickness, and then the metal is lifted off (how electroforming works). The logo itself is a thin piece of real metal, hard to the touch, with a raised edge. It goes on with a transfer film, so once it’s applied, all you see is the metal logo, with no sticker background.

If you need printed artwork or a full metallic background, metallic PET labels are the better fit. We compare real metal with dome stickers and metallic labels in metal stickers vs dome stickers, so we won’t repeat it here.

Can metal logo stickers go on a curved surface?

Yes, but it depends on how long the logo is.

Our nickel is very thin. On a flat surface, it’s easy to apply and holds best. On a candle jar or drinking glass, the metal has to bend to follow the curve. For a logo about 3–5 cm long, the bend is slight, and the thin nickel handles it well.

The longer the logo, the more it has to bend, and the more its ends want to lift. We wouldn’t recommend a very large logo on a curve.

Why do small separate letters come off?

We’ve received designs like this more than once: a bold brand name on top, a thin line with a small ornament in the middle, and a line of smaller serif lettering for the product range below. The whole logo is about 55 mm wide and 30 mm tall, meant for a candle jar.

Fictional VELNORA metal logo diagram, 55 × 30 mm, with separate CAFÉ ATELIER letters, a detached accent and separate decorative elements.

The brand name on top is fine. The problem is the bottom line. Each letter is only a little over 2 mm wide, and the thin serif strokes are a fraction of a millimeter. If a letter carries an accent, like É, the accent is a separate piece, even smaller than the letter.

Each of those letters is its own tiny piece, stuck down on its own. In our own tests, letters this small shifted when we simply ran a thumb across them with light pressure. As a rough guide, be careful with any separate piece smaller than about 4 × 4 mm.

This has little to do with the adhesive. We use 3M adhesive, but a piece of metal only a few square millimeters in size gives the glue very little to hold, not enough to resist a thumb. We also compared this side by side: under the same thumb test, larger shapes and connected lettering stayed in place, and a logo joined into one piece was the most secure.

So the curve and the small letters are two different problems. A piece that’s too small can’t hold on any surface. A piece that’s too long lifts at the ends on a curve. In short: no piece too small, and nothing too long on a curve.

What if the letters can’t get any bigger?

Often the logo size is fixed. The product is small, and there’s only so much room. In that case, we usually suggest one of two things:

  1. Make the small letters bolder. Thicker strokes give each letter more area. It’s the smallest change to the design.
  2. Connect the letters. Add a thin bridge line under the small letters to join them, and a short vertical line to tie it to the ornament above. Now the small letters, accent and ornament form one connected lower assembly. Designed well, the line looks like it was always part of the logo.
VELNORA metal logo diagram with CAFÉ ATELIER, its accent and the ornament joined by bridge lines; the upper brand letters remain separate.

The second option is the most secure, but not every customer wants to change their lettering. Some would rather try the original design first. That’s completely understandable. It’s their brand.

In that case, we suggest ordering our minimum of 10 pieces, putting them on your own product and handling it the way you normally would. It doesn’t cost much, and the result speaks for itself. Our experience tells us where problems are likely, but what really decides it is how they hold up on your product.

Can metal logo stickers go on eyeglass frames?

They can, but the conditions are tight: the logo needs enough area, and the spot can’t curve too sharply. On frames, and especially on the temples, space is narrow, so the logo has to be small. That makes small separate letters the biggest risk. The smaller and more scattered they are, the more easily a finger rubs them off, and glasses get handled every day.

For eyewear, we lean toward simple, bolder shapes or connected lettering.

Can glasses with metal logo stickers go in the dishwasher?

Honestly, we haven’t tested them in a dishwasher, so we can’t promise they will hold up. Dishwashers vary a lot, and there’s no single answer we can give.

If your glasses will be washed often, the advice is the same: order a small batch first, wash it the way it will really be washed, then decide on a larger run.

How do you know if your logo will work as a metal sticker?

The quickest way is to send us your artwork, along with the finished size, what it’s going on, and ideally a photo of the product. Our artwork guide explains how to prepare your files.

We’ll tell you right away which letters may be too small and what to watch for on your product, then send you a quote. If a metal sticker isn’t the right fit, we’ll say so and suggest another label option.

If you want to know where the shape and thickness come from, see how metal stickers are made.

If your logo is going on a flat surface, such as a perfume bottle, gift box or laptop, see metal logo labels for products and packaging.