Custom Product Sample Kits
Custom kits for components, finish chips and swatches. The photos show past customer projects made by ZIVFY, not stock products or fixed designs. Send your design or references, or contact us without a design.
We plan the structure, size and sample layout around your samples and use, with the cover, text and printing customized to your requirements.
Kits are usually supplied empty for your own samples. Optional factory mounting and packing are quoted separately.
Prefer email? Write to [email protected]

Choose the structure and sample supports
The outer structure and the supports that hold your samples are two choices we plan together. You do not need to choose a final format before contacting us. Photos, basic dimensions and how you will show, remove or compare the samples help us recommend a layout.
Outer structure
Supports inside the kit
Foam and board supports can be used with different outer formats. We agree the combination for your samples; these are references, not fixed kit designs.
Supports for thick or irregular samples

EVA or another suitable foam can hold thicker or irregular pieces. The cutouts are planned around the actual part shape and depth.
Tell us which faces, edges and moving parts the buyer needs to see or touch. We review foam compression, contact with the sample surface and room for fingers against the actual parts.
Board supports for thin samples

Paperboard or rigid-board supports can use windows, recessed spaces, tabs or pockets for thin, flat samples, without adding unnecessary foam depth.
Fixed mounting is possible for selected samples. We review how much of each sample should be visible, access to its edges and whether it needs to be removed.
Removable pages for different sample depths

Removable ring-binder pages can hold samples of different depths. Each page may use foam, layered board, pockets or recessed supports.
We check the complete page stack together: room to turn pages, viewing order, weight distribution and closure. A single page that fits does not confirm the fit of the whole kit.
Supply and assembly
- Kit components
- We make the presentation structure, prepared sample supports and agreed printed parts. You supply the product or material samples. You add or attach your samples to the agreed, prepared supports after delivery. This usually avoids sending the entire sample collection to China.
- Optional assembly
- Factory mounting of your samples and packing are quoted separately. We agree the sample positions and assembly responsibilities for the project.
- Enclosed sample insets
- If a fixed sample is enclosed in a bonded inner page sealed on all four edges, you must send the samples to our factory. They are inserted while the page is being bonded; this structure cannot be loaded later at your location.
- Quantity and timing
- Minimum order quantity and lead time depend on the sample mix and construction. Both are confirmed with the quote for your kit.
Confirm the fit before production

Start with photos and measurements
Photos and basic measurements help us assess the kit. Before the final cutouts and clearances are approved, we agree how to confirm the fit: confirmed drawings or CAD, representative samples, or agreed results from local fitting.
Check a prototype with actual samples
Check the fit, room for fingers, contact with surfaces, removal and return of samples, viewing order, balance and closure. For heavy, fragile or frequently carried kits, review the loaded kit, handle, closure, supports and outer shipping packaging together.
Check production against the approved kit
Check the approved dimensions and sample positions, printing, labels, material condition, cutting and forming, assembly, set completeness and packing.
Discuss your sample kit
The photos show past customer projects made by ZIVFY, not ready-made stock. Your kit can have a different structure, size and sample arrangement, with a cover, text and printing to your requirements. Send your design or reference images if you have them. If you do not have a design, contact us to discuss your samples.
We normally supply empty kits for your samples. Factory mounting and packing are quoted separately. Bonded pages sealed on all four edges require your samples at our factory.
For hard samples such as stone, glass or panels, you can get the same framed look without sending them to us: see how edge-hiding frame pages work.
Start with the details you have. Estimates and reference photos are welcome; you can contact us before choosing a final format or preparing complete technical files.
- Available product photos or reference images; basic dimensions or a photo with a ruler.
- The number of samples in each kit and the expected number of kits.
- How the kit will be used, the destination and your target date.
- Your own design or preferred arrangement, if you have one.
Before production, we agree how to confirm the fit and the details below. This may require confirmed drawings or CAD, representative samples, or agreed local fitting results.
- Photos and arrangement: Front, back, side and edge views, with a ruler or scale reference where useful; the preferred sample arrangement and any format references.
- Size and weight: Each item’s length, width, thickness and approximate weight, including irregular shapes or moving parts.
- Viewing and handling: Items per kit, the faces and edges that must remain visible or accessible, and whether samples stay fixed, lift out for comparison or testing, or need to be replaced. Plan return positions and space between samples.
- Sensitive surfaces: Fragile, sharp, scratch-sensitive, flexible or easily marked areas that affect the supports and handling.
- Printing and information: Logo, colors, artwork, labels, product names, technical notes and reading order, matched to the sample positions.
- Order and supply: Kit quantity, intended use, destination, target date and whether you want empty kits or separately quoted factory mounting and packing.
Tell Us Your Sample Kit Idea
Describe what you have in mind in your own words. You don't need specs or a finished design. We will work out the structure with you.
Design Is Included in Your Order
- Discuss your samples
- Confirm the format and quote
- Make payment
- Receive your free design
After we confirm the structure and quote and receive payment, we prepare the agreed free design using your logo, text and sample information.
Common questions
Can we add our own samples locally?
Yes. You can fit or attach your samples to the agreed prepared inserts after delivery. You normally do not need to send the full collection to China. The exception for fully enclosed sample insets is explained in Supply and assembly.
When are physical samples needed?
They can help confirm exact fit, finger access, surface contact, balance and closure, especially for irregular, heavy, fragile or highly finished pieces. We agree whether to use representative samples, confirmed drawings and measurements, or your local fitting results.
Is EVA foam always the best insert?
No. Foam can suit thick or irregular parts, while thin, flat samples may work better with board windows, recesses, tabs or pockets. The choice follows the sample and how buyers need to handle it.
Can one kit hold different shapes and thicknesses?
Yes. Removable binder pages can use different holders for different samples. The full page stack, turning space, access, weight distribution and closure must be checked together before the layout is approved.
Can samples be removed and put back?
Yes, when the holder has suitable finger access, notches, recesses, tabs or removable carriers. Return positions and clearance around neighbouring samples are planned so repeated demonstrations stay organized.
Can a sample kit work as a sales kit for our reps?
Yes. Many custom sales kits are simply a sample kit built to travel: a material sample box or folder your sales team can open in front of a client. A metal finish sample kit or a mixed material kit uses the same build, sized to your samples.
