By , ZIVFY · 18 years in print

While reading printing industry material recently, I came across a question in the Adobe Community. A designer had ordered triplex business cards with the text centered on both sides. When the cards arrived, he found that the text on the front of some cards was noticeably shifted to one side. The printer initially said this was normal. They later agreed to remake some of the cards, but he still wanted to understand: should he have to accept that kind of misalignment?

Quite a few people have run into misaligned business cards. If you are planning to order your own, reading about an experience like this can leave you wondering whether your cards might turn out the same way.

We make color core business cards, and we cannot guarantee that the positioning on every card will be exactly the same. But when something is visibly off, we cannot just dismiss it with “They’re handmade, so some variation is unavoidable.” We need to check the cards against the artwork and find the problem. Cards that need to be discarded should be discarded, and cards that need to be remade should be remade. That is work we should do during production.

Printed business card pieces held in hand.

If It Looks Off, Measure It Against the Artwork First

When we check business cards, we first look at whether anything is noticeably off in the overall appearance. If something looks wrong, we compare it with the artwork: we check the distance from the text to the edge in the file, then measure that same distance on the finished card.

Our eyes are not always accurate, so “I think it looks a little crooked” is not enough on its own to make a judgment. Once we measure where the text was placed in the original artwork and where it ended up on the finished card, the difference is clear.

In our usual practice, we generally do not make further adjustments when the text or graphics are within 1 mm (about 0.04 in) of their intended position. Making these high-end triplex business cards involves bonding the layers by hand. We cannot make the positioning on every card exactly identical. That simply is not possible.

But the fact that the layers are bonded by hand does not mean that visible misalignment must have happened during that step.

After Two Cutting Mistakes, We Moved the Check Earlier

At ZIVFY, we have had two cases where an earlier paper-cutting step left the text off-center. After that, we moved the check to the first cut after printing. We now check the positioning at that stage before bonding the layers.

Triplex business cards are not cut straight to their final size after printing. We first cut the paper slightly larger than the finished card, leaving a little extra around all four edges. We leave an extra margin along one edge and use that allowance as a guide when cutting the card to its final size. Once the layers have been bonded together, we die-cut them—cut them to their final size. In those two cases, we were not careful enough during the earlier cut and cut the paper in the wrong position.

We leave extra paper along one edge and use that allowance when cutting the card to its final size.

At this stage, it is easy to think: there is still some extra paper around the edges, so if the positioning is slightly off, we can adjust the cutting die at the end to bring it back into place. But from doing the work ourselves, we know there is not that much room left for adjustment. If that earlier cut is off, the text can still end up shifted to one side when the card is cut to its final size.

So when we train employees now, we explain what those two mistakes taught us: the positioning needs to be checked at the first cut. We cannot leave the problem until the end and expect an adjustment to the cutting die to fix it. No amount of care during the later bonding step can replace that earlier check.

We are careful when bonding the paper. Whether we are making thick cards or triplex cards, we keep misalignment between the layers within 0.3 mm (about 0.012 in). Business cards are small, so a 1 mm difference between the layers is quite easy to see.

During production, we also make more cards than the customer ordered to allow for cards that have to be discarded along the way. If we find cards that do not meet our standards, we can remove them without keeping them just to reach the ordered quantity.

As for cards like the ones described above, where the cut is already off and cannot be corrected, we remake them. That is a problem in our production, and we cannot expect the customer to accept it.

Not Every Business Card Should Be Centered

The checking starts when the customer sends us the artwork.

Some designs look centered, but when we measure them, the distances on the left and right are different. In that situation, we adjust the positioning first, show the customer, and ask whether that is the centered result they want. We make the cards after they confirm.

Other customers send us only a small amount of text but arrange it in a very individual way. The name, phone number, social media account, and address may not follow the usual order, and the text may not be centered. As long as the layout does not interfere with production, we follow the original artwork.

So whether a card has been made off-center depends on the design the customer approved. If the content was meant to sit toward the left, we cannot call it a production error just because it is not in the middle.

We usually just remind customers to keep important text and graphics at least 3 mm (about 0.12 in) from the finished edge. If the design includes foil stamping or another special process, we check the specific artwork to see how much space is needed. This distance leaves room for the content inside the card. It is different from the extra paper around the outside that we cut off at the end.

You do not need to learn how to measure business cards or judge how well the layers are aligned before ordering a triplex card. Just send us the artwork and tell us what matters to you: whether the text should be centered, which side’s layout you care about most, and which elements you want kept exactly where they are.

We will confirm those requirements first, then check them during production. If we make a mistake and need to remake the cards, we will remake them. We will not turn a production problem into a condition the customer has to accept.