Letterpress
Ink. One copper plate for each color, so the color sits inside the pressed area.
Photos show past ZIVFY custom orders for reference. Send your own design or reference images, or contact us to discuss ideas before your artwork is ready.
Letterpress pushes an inked copper plate into thick paper, so your logo and text sit slightly below the surface. You see the color and feel the bite. We print on cotton from 360 to 750 gsm, on black card with opaque white ink, and on duplex builds when you want a deep impression with a flat back. From 200 cards per design.
Letterpress, blind deboss and foil deboss all press the design into the paper. The difference is what sits in the impression.
Ink. One copper plate for each color, so the color sits inside the pressed area.
No ink. Only the shape and shadow show, which suits a quiet logo on cotton or black card.
Metallic foil pressed in. See our foil business cards for foil colors.
You decide the depth.
A soft press with no mark on the back. Good when you print both sides.
A clear bite you can feel with your thumb. A deep press shows on the back of a single sheet.
We duplex two sheets, so the front takes the deep press and the back stays clean for printing.
| Weight | Thickness | Colors |
|---|---|---|
| 360 gsm cotton | about 0.6 mm | White, cream, grey, navy, kraft brown |
| 420–550 gsm cotton | about 0.63–0.85 mm | White, cream |
| 600–650 gsm cotton | about 0.8–0.93 mm | White, cream, light grey; rough and watercolor textures |
| 750 gsm cotton | about 1.2 mm | White |
| 450 gsm black cotton | about 0.9 mm | Black |
Black card and metallic paper also work well with letterpress. These sheets are thinner (black card is about 0.5 mm), so the impression is lighter, about 0.2–0.3 mm deep on metallic paper. Not sure which weight? Compare them in our sample book.
Each card uses a different paper, ink and impression.
Tell us the quantity and delivery country. Add your artwork or a reference image when available. We will review the paper, finish and production requirements, then reply with a custom quote.
Photos are past custom orders for reference. Your cards are made to your requirements. Send a reference image or discuss your ideas before your artwork is ready.
Kevin, founder · 18 years in printing · Our factory is in Jiangsu, China
Production timing, shipping costs and any tax or duty arrangements are confirmed with your quote before payment.
Letterpress presses an inked plate into the paper, so the impression has color. Debossing presses without ink, so only the shape shows. Both can be deep or light.
On a single sheet, yes. If you want a deep press and a clean back, we duplex two sheets so the back stays flat. If you print both sides on one sheet, we keep the press light.
Each color needs its own copper plate and its own pass on the press, so we suggest one or two colors. More is possible, but a business card has little space and more plates add cost.
Keep lines at 0.5 mm or thicker. Finer strokes on a copper plate may not take ink evenly and can look broken.
Yes. Our white ink covers black card cleanly, and white ink and foil both work on black cotton.
No. We keep your copper plates on file, so a reorder with the same artwork reuses them.
200 cards per design. Most letterpress orders ship within about 5 business days after you approve the proof. Delivery time depends on your country and is confirmed in your quote.
Thick cotton gives the deepest, softest impression. Black card suits white ink, and metallic paper suits a brighter look. Our sample book has the cotton weights side by side.